Zelda (Ocarina of time)

Hi hi! This Zelda pattern is based on Ocarina of Time and it is very similar to the Link I made before.

Materials:

– Cream, yellow, white and pink yarn  (I used 100% cotton yarn Barroco by Circulo, which is a bulky / 12 ply (7wpi));
– Thin yellow yarn to embroider, thin blue yarn and thin red yarn (I used 100% cotton yarn Anne by Circulo, which is a Fingering / 4 ply (14 wpi));
– Thin gold yarn (I used 100% cotton yarn Esterlina 5 by Círculo, which has a metalic look and is a Light Fingering);
– 4mm and 2mm (only for the thin gold yarn) crochet hook;
– Fiberfill;
– Tapestry needle, needle and scissors;
– Safety eyes 10mm and a small pink plastic jewel to her crown;
– Pins;
– Thick wire to sustain her head (because of the  hair her head is too heavy to stand up by itself, so you have to place a very thick piece of wire from the top of his head until her body).

Notes:

– I always do my crochet works using continuous rounds. I will let you know when you have to join rounds;
– Everytime I will do a crochet work, the first thing I do is take a look in the entirely pattern before start doing it, so, I can have an idea of how the pattern works. Well, I recommend you to do the same;
– For sewing the pieces together you will use the tapestry needle;

Recently, I’m having a hard time to answer all the questions sent to my email and the comments. I’m sorry that I’m not able to answer your doubts. However, if you have any doubt, I’m sure that it is worth to leave a comment here, because even if I can’t answer you, I’m sure that someone in the community will try to help you out ^^

Pattern:

– Head:
R1: 6 sc in MC (6)
R2: inc (12)
R3: sc, inc (18)
R4: 2 sc, inc (18)
R5: 3 sc, inc (30)
R6-13: sc in each sc (30)
R14: 3 sc, dec (24)
R15: 2 sc, dec (18)
Place the safety eyes between Rounds 10 and 11. Leave about 5 holes between the eyes:

R16: sc, dec (12)
Embroider her eyebrows with yellow yarn.


R17: sc, dec (9)
Finish off and leave a long tail for sewing.

 

Ears:
R1: Ch 4, 3 sc from the second ch from hook (3)
R2: ch 1, turn, dec, sc (2)
R3: ch1, turn, 2 sc (2)
R4: ch1, turn, dec (1)
Finish off and leave a long tail for sewing.

Hair:
R1: 6 sc in MC (6)
R2: inc (12)
R3: sc, inc (18)
R4: 2 sc, inc (24)
R5: 3 sc, inc (30)
R6: sc in each sc (30)
R7: Make a sl st in the next stitch, then make 2 ch and a dc in the same stitch. After that make 16 dc (17)
R8: ch2, turn, 17 dc (17)
R9: ch2, turn, dec, 13 dc, dec (15)
R10: ch2, turn, dec, 11 dc, dec (13)
R11: ch2, turn, dec, 9 dc, dec (11)
Finish off.

Crown (Thin gold yarn and 2mm hook):
R1: ch 37, sc 36 from the second chain from hook (36)
R2: sl st 4, sc, (dc, ch1, dc) in the same stitch, sc, sl st, sc, hdc, dc, (trc, ch1, trc) in yhe same stitch, dc, hdc, sc, sl st, ch2 and dc, trc, (dtrc, ch1, dtrc) in the same stitch, trc, dc, sl st, sc, hdc, dc, (trc, ch1, trc) in the same stitch, dc, hdc, sc, sl st, sc, (dc, ch1, dc) in the same stitch, sc, 3 sl st.
Finish off.

Body and legs (work joining rounds):
Start with white yarn
R1: ch 5, 2 sc in 2nd chain from hook, 2 sc, 3 sc in the last chain, 2 sc, sc (10)
R2: 2 inc, 2 sc, 3 inc, 2 sc, inc (16)
R3: sc in each sc (16)
Change to pink yarn
R4-R7: sc in each sc (16)
R8: make one sc in each sc, using only back loops (16)
Change to cream yarn
R9: 6 sc, sc in the 15th sc, sc in the 16th sc (8)
R10: sc in each sc (8)
R11: sc in each sc (8)
R12: 2 sc, dec (6)
Finish off and leave a long tail for sewing. The first leg is done.
Attach the cream yarn in the remaining hole and:
R9: 8 sc (8)
R10: sc in each sc (8)
R11: sc in each sc (8)
R12: 2 sc, dec (6)
Finish off and leave a long tail for sewing. Second leg is done.

Belt (Thin gold yarn and 2mm hook):
R1: ch 35, 34 sc from the second chain from hook (34)
Finish off.

– Bottom of her dress:
**Start with white yarn
R1: ch 21, 20 sc from the second chain from hook (20)
R2: inc, 18 sc, inc (22)
R3: 10 sc, 2 inc, 10 sc (24)
R4: 6 sc, inc, 10 sc, inc, 6 sc (26)
R5: sc in each sc (26)
Change to pink yarn
R6: sc in each sc (26)
Change to white yarn
R7-8: sc in each sc (26)
Finish off.

Pink detail on the back of her dress:
R1: 21 ch, 20 sc from the second chain from hook (20)
R2: dec, 18 sc, dec (18)
Finish off.

Blue banner (Thin blue yarn and 2mm hook):
R1: 7 ch, 6 sc from the scond chain from hook (6)
R2-4: sc in each sc (6)
R5: dec, sc, dec (4)
R6: dec (2)
R7: dec (1)
Finish off.
With a thin red yarn make and edge of sc around the banner.

 

– Arms (work joining rounds):
Start with cream yarn
R1: ch 5, sc 4 (4)
R2: ch 2, attach the yarn in the 1st stitch in order to make a circle and then make 6 sc (6)
R3-4: sc in each sc (6)
Change to white
R5-7: sc in each sc (6)
R8: 2 sc, inc (8)
R9: 3 sc, inc (10)
R10: dec (5)
Finish off.

 

Shoes  (work joining rounds – pink yarn):
R1: ch 6, inc in the 2nd ch from hook, 3 sc, 3 sc in the last chain, 3 sc, sc in the last chain (12)
R2: 4 sc, 3 dec, 2 sc(9)
R3: 2 sc, 3 dec, sc (6)
Finish off.

Shoulder pads (thin gold yarn and 2mm hook):
R1: 7 ch, 6 sc from second ch from hook (6)
R2: sc in each sc (6)
R3: inc, 4 sc, inc (8)
R4: inc, 6 sc, inc (10)
R5: inc, 8 sc, inc (12)
R6: inc, 10 sc, inc (14)
R7-8: sc in each sc (14)
R9: 24 ch,

attach the yarn in the first sc of the previous round, then ch 1, hdc, dc, (trc, ch, trc) in the same st, dc, hdc, 14 sc
R10: ch 1, turn, dec, 10 sc, dec (12)
R11: ch1, turn, dec, 8 sc, dec (10)
R12: ch 1, turn, dec, 6 sc, dec (8)
R13: ch 1, turn, dec, 4 sc, dec (6)
R15: sc in each sc (6)
Finish off.

 

 

Assembly:

1. Make all the crochet pieces.

2. Sew her ears to her head.

3. Sew her hair to her head. Cut many pieces of yellow yarn to attach with a knot to her head. You are going to attach some of them skirting the front of her hair. About 2 rows. Then attach 1 row skirting the back of her hair.

Grab some strands of hiar from each side of her head and fasten them to make her hairstyle.

   

Attach about 5 strands of yarn in each side of her head near her ear to look like that:

4. Sew her crown to her head below her hair and glue the jewel to the crown;

5. Sew her feet to her legs (Stuff her feet lightly);

6. Sew the bottom of her dress between round 7 and 8 of her body;

7. Sew the pink detail that is located on the back of her dress;

8. Sew the blue banner to her gold belt with gold yarn. Then embroider the triforce on it. Attach the belt to her waist with a few stitches;

9. Insert a thick wire inside her head and body. Because her head is too heavy to stand up by itself you need to put this wire;

10. Sew her arms to her body (just stuff her hands, no need to stuff her arms);

 

11. attach her shoulder pads with a few stitches to her shoulders;

I did not create this character, Zelda is copyright of Nintendo!!

This Pattern was created by Ana Amélia Mendes Galvão.

1. Please do not claim my pattern as your own;
2. If you use this pattern, please, give me the credits;
3. If you wish to share this pattern, you may create a link to my blog, but please do not post it on your site;
4. You may not sell any of my patterns;
5. You are free to adapt this pattern, you can build another upon this one, but you must give appropriate credit to me for the original pattern;

3 thoughts on “Zelda (Ocarina of time)”

  1. Pingback: Amigurumi Zelda Karakteri Yapımı - Örgü Modelleri

  2. Pingback: Pattern: Link's Hylian Shield, Sword and Sheath - All About Ami

  3. Pingback: Link - All About Ami

Leave a Reply to Pattern: Link's Hylian Shield, Sword and Sheath - All About AmiCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.